Units

This is supposed to give you a quick overview on the many, many ways you can try to quantify various types of properties in a way that is both scientific enough for in-universe use and understandable enough for your readers. We're going to cover the basics first, and then advance to the more strange and sometimes fictional things later on in this guide.

This document is non-binding (i.e. you receive no official penalties for doing things different), however, keep in mind that these guidelines exist for a good reason and you should always have a good reason to deviate from them.

0. The Basics

When in doubt, it is never a bad idea to use SI units, colloquially referred to as the "metric system". It consists out of seven base units (the second, the metre, the kilogram, the ampere, the kelvin and the candela, plus the dimensionless mole) from which other quantities can be derived, e. g. as speed is distance per time, you can express it in meters per second, kilometres per hour, or any variation thereof.

The metric system is well-defined, suitable for both colloquial and scientific use, and ubiquitous: at the time of writing, there are only two countries in the world that haven't formally adapted SI units yet: Myanmar and Liberia.1

However, if the field you are concerned with is customarily using a special measuring convention, it is often more clear deviate and use that set of units and add the metric conversion in brackets. Examples like this are knots and nautical miles in naval contexts, inches for calibre, various astronomical units (including the astronomical unit), etc. If things get really weird, you might have to use planck units.

It is also advised to do that when you would arrive at an unintuitive base unit — this mostly applies to watthours or electronvolts being generally easier to handle than joules, but also to such weird things like measuring the expansion of the universe in kilometres per second per megaparsec and not herz.2

Keep in mind that many values might be based on estimation, derived from observation under harsh conditions, or simply be back of the envelope calculations. You never have to give excess numbers of significant digits or state an error interval (unless you want to), but should clearly mark values with uncertainty.

One last thing before we get started into particular cases: If you ever struggle with getting a grasp on a particular quantity, check out the excellent Orders of magnitude series of articles on Wikipedia. Randall Munroe's Radiation and Money charts are also of help for these two particular cases.

1. Numbers

The next most basic thing you'll encounter are plain numbers. Always write numbers connected to a unit as digits (e.g. "1 day" and not "one day"). Spelling out numbers is okay for small numbers (zero to twelve, sometimes up to twenty) when they enumerate something abstract (compare "there are two approaches to handling the Item" with "there are 2 instances of the Item").

Don't spell out the number and then use the digit representation in parenthesis — this is generally considered to be humorous around here. The opposite (digits, with the spelled-out version behind) is generally used in accessible/simplified language documents and therefore also misplaced here.

You can use either comma or periods as decimal separator3, but never use either of these for merely grouping digits (e.g. writing a million as 1.000.000). If you need to group digits, use underscores (U+005F _), the Apostrophe (U+0027 ') or the reduced space (U+2009  ) in between groups of 3 digits each. Don't use the underbar representation.

Never use short scale to describe larger numbers. Using long scale is also better avoided — whilst it is internally consistent and intuitive, any number ending in -illion might easily be confused for its short-scale "equivalent". Don't use the south asian numerals lakh and crore. These rules are relaxed in interviews with non-academic people, who will of course verbally use their native customs.

Instead, when dealing with bigger numbers, it's best to use scientific notation or the closely related engineering notation which works the same, but with exponents that must be a multiple of 3. For example, 15700000 is 1,57×10⁷ in scientific form, but 15,7×10⁶ in engineering form.

For complex numbers, use the form a+bi, using either an i, and italicized i or the Unicode character 𝑖 (U+1D456). Only use j, j and 𝑗 for quaternions (together with k, k and 𝑘 respectively).

For irrationals without a given name, all bets are off. We'll deal with that if we ever get there.

2. Mass and Weight

Besides using SI-prefixes for the gram, you may also use tonnes. Don't ever use the term "metric ton" in writing — the short and long ton are spelled differently and have the abbreviation tn, so there is never a risk of confusing these. Similarly, the term "tonnage" exclusively refers to the cargo capacity of vehicles.

Remember that mass is an unchanging quantity4, whereas weight (a measure of force) changes with the force of gravity. I.e. thing don't "weight" kilograms — try to use alternative wording like "the Item masses 150 kg", "the Item is a 20 g ___" or "The Item is a ___ of 3,1 t".

Assume inertial and gravitational mass are assumed to be identical, and variation thereof is an anomaly in and of itself.

3. Time and Date

Seconds, Minutes and Hours are all perfectly fine. However, when it comes to days, always keep in mind the difference between sidereal and synodic days (in short: the time earth needs to spin 360° vs. the time between two consecutive zeniths). It's usually better to use 24 hours instead.

The week should be assumed to be 168 hours. Don't make assumptions about which day is the start of the week without stating it either explicitly or inferring it from the region.

Don't use months - the duration of a calendar month fluctuates by as much as 4 days (more than 10%!) and isn't fixed in the case of February. Use the term lunar month for orbits of the moon.

Years are a somewhat diffuse term as well, but generally okay to use for long durations or time differences in human calendars. The abbreviation is a (for "annum"), however y is used in historical contexts (kya and Mya and Gya meaning thousand, million and milliard years ago, respectively).

Use CE and BCE instead of AD and BC for dates. In many historical contexts, you have no other choice than to specify the exact calendar used. Dates should be formatted YYYY-MM-DD to be internationally unambiguous (this also has the added benefit of lexical ordering equalling temporal ordering). Write leading zeroes, e.g. the date of writing is 2024-05-01.

Time in the day is denoted as HH:MM:SS, plus an optional time zone (if you want to keep it open where a given Insurgency facility is located, just use "local time"). Time zones are either given an offset from UTC, or NATO military time zone code. Always use 24 hour time formats.

In many contexts where sub-second timing is important, you'll be forced to specify your time system. Unix time is a good choice in most contexts. Often, you can avoid the problem altogether by using "mission time" instead.5

As there is currently no agreed upon founding date for the Insurgency, there is no clearly defined "Insurgency Calendar". You are, however, free to make up your own if you want to keep things vague.

When dealing with stuff off the conventional earth, always make sure to specify a reference frame — this is an extension of the "mission time" trick and a great opportunity for extra flavour, like using "sols" or internal time reference frames for spaces experiencing time manipulation.

4. Currency

Always use the local custom with where to place the currency abbreviation or symbol (it's $500, but 19,00€); most of the time, it is best to use three-letter codes (CAD, CHF, CLP, INR, JPY, RMB, etc.) to avoid confusion. If used in historical contexts, it's always good to give inflation adjusted values in parenthesis to give an approximate figure of buying power. In general, the more you can avoid giving explicit monetary values, the better. If unavoidable, things like the Economist's Big Mac Index can get a gross estimate of the actual relative value of currency in other regions.

5. Light

6. Durability

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License